Sink clevis

The clevis connects the pop-up drain in your sink to the lever that operates the drain. If the drain does not open and close as it shoul inspect the clevis to . Pop up Rod Kits For Basin Waste-Taps. Universal fit pop-up drain clevis clip is used with lavatory pop-up center piece assemblies.

Stainless Steel construction and finish. Find the setscrew that joins a vertical flat rod with holes in it, the clevis ro to the bottom end of the lift ro which is above . The clevis is a piece of flat metal perforated with a series of adjustment holes. Not all sinks have a clevis. Instea the pivot rod may connect . Installing new clips will restore function to old drain assemblies.

It is an easy alternative to replacing the bathroom sink drain assembly. Clevis clips help connect . A sink stopper is usually raised or lowered using a lever or a knob on the faucet. That lever is connected to a flattened bar called a clevis that . Includes repairing or replacing a pop-up sink or tub stopper.

The flat, slotted clevis is connected by a small spring clip to a pivot rod–and–ball . They are joined by a piece of metal strapping called a clevis , which you can manipulate to compensate for the short rod. Move everything from under the sink so you have room to work. Check to see that the horizontal pivot rod is connected to the clevis.

Loosen the retaining nut that . The pivot rod is connected to the lift rod by the clevis screw and clevis strap. It is also held together by the spring clip, which the pivot rod goes through. To make sure the sink will not leak, do a thorough test.

Adjust so clevis is vertical Put the cap behind the ball on the pivot rod as shown. You may be able to reuse the old chrome trap from the wall-hung sink. It should be a somewhat universal part.

Get underneath the sink and look where your pivot rod is connected to the clevis strap. Disconnect the pivot rod from the clevis strap by . Pinch the spring clip to release the flat bar ( clevis ) from the pivot rod. In many sinks , hair and crud accumulates around the body of the . I just cleaned out a bathroom sink ;cleaned the trap and the drain stopper. Also, thoroughly clean the mouth of the drain in the sink to ensure that. Feed the pivot rod into one of the clevis holes and make it fast with the . Simple step-by-step instructions on repairing your sink pop-up drain.

To make the stopper close more tightly, move the pivot rod up a hole or two on the clevis. The vertical extension bar is connected by a clevis (a “U” shaped joint) with the lift rod that extends to the topside of the sink. Undo the screw to unfasten the lift . Every sink has a drain trap, and that means every sink will probably get. Pop-up replacement parts clevis clips hole size=small Bagged.

Items in this section are arranged alphabetically by. Older-type stoppers are moved up and down by a three-part linkage consisting of a lift ro a metal strip with holes in it called a clevis , and the pivot ro which . Pop-up drain stoppers in bathroom sinks are a convenient. Underneath the sink , the lift rod attaches to a perforated metal bar called the clevis.