Bad squishy

In Canada, it is very important to properly winterize marine equipment. Particularly inboard engines. If an engine is left full of water, and it freezes it will crack the . Drain the motor and replace the plugs and then place the trough behind the boat so the anti-freeze can return to it, using a plastic hose to draw . I had a vague notion that I would support a bucket of coolant someway above my . Boat Repair Forum - Powered by vBulletin.

As for not being able to operate this engine during winterizing. All inboard and sterndrive engines have petcocks that are either turned or removed in order to drain water from the block, exhaust manifolds, and hoses. Learn these six steps to winterizing your boat. Let Omaha Marine Center winterize your boat properly to Manufacturer. Each vessel may be different, so you want to ensure that you are using the correct products when it comes to antifreezes, fogging oils, and etc.

I had to winterize the boat the other day. Teaching the kids to do some mechanical work! Did this video a few years ago but forgot to post it.

How to winterize a boat and prevent the engine from freezing.

If you have an inboard , or 8. Your first step in winterizing should be to make a checklist of all items that need to be accomplished. Florida Keys, we recommend winterizing your engine if you will be laying up the boat for even a few weeks to minimize the chances that a sudden freeze will put . Water expands when it freezes and not properly winterizing your engine can lead to a cracked block, necessitating engine replacement. When the temperature falls below freezing, if there is water inside your engine or gear case, the . Winterizing Your Boat Engine. This process will flush salt, dirt, and other contaminants out of your engine. This inboard engine is connected to an outboard drive unit at the rear of a power board.

Preparing your boat for winter is also known as winterizing. To winterize an inboard engine , use the water pump and intake hose. The term “ winterizing ” refers to the procedure taken to prepare your motor or. Steps to help you with winterizing your inboard boat motor.

This article is intended to give you some facts and tips to winterize your boat. Drain water from the engine block, exhaust system, sea-pump, hoses and . Prep now for smooth sailing later. You do not need to take the spark plugs. Remove all visible aquatic plants and animals from your boat , motor , trailer and . Indee boat motors never break down at the dock .

Flush the engine with a nontoxic antifreeze connecting a hose to the . Storage of Boat Until Spring: to request your boat weeks notice is required. While we offer winterizing in our marine engine service department, many boat owners take on some or all of the tasks to properly prepare their . Although this is not an all-inclusive checklist for winterizing your inboard motor. Includes oil, filter, drain, stabilizer ex: ski boat.

There are basically two ways to winterize the engine to prevent damage from freezing. One is to find and open every drain plug in the engine. The most important step in winterizing a boat ? You have to take out any water,” says Fort. This includes the engine and fresh water system.

The steps you take to winterize your boat will depend on the size of boat , the type of motor (s), and where you store your boat. Our boat winterization services are for winterizing outboard motors and Sterndrives. Many Bob-fans have asked me how they should winterize their marine engine.

The first step in winterizing your boat should be to make a list of all your winterization tasks.